+ Reply to Thread
Results 1 to 8 of 8

Thread: Mounting a transducer in a canoe

Hybrid View

  1. #1
    Join Date
    Dec 2002
    Location
    Des Moines, IA
    Posts
    1,499

    Default Mounting a transducer in a canoe

    Some years ago, Joe Hyde wrote an article about building a transducer holder out of sleeping pad foam and glued it to the floor of his glass canoe. He then put the transducer into the foam and filled it with water. I was wondering if anyone has tried this and how it worked out.
    " If a man is truly blessed, he returns home from fishing to the best catch of his life." Christopher Armour

  2. #2
    Join Date
    Feb 2012
    Location
    Virginia Piedmont
    Posts
    141

    Default

    I can't answer your question, because I've been too much of a cheap$kate to buy a sonar unit.

    I have thought about sonar for my canoe, but unless the canoe has a motor on it, paddling around a lake looking straight down at the bottom is awfully hard work. To me, it doesn't seem to promise much benefit when the water is shallow like for areas that would be interesting to a fly angler. However, there is one fairly new technology that finally makes sense to me for a canoe. You can scan everything in casting range without moving, and you don't need to look through your hull. The transducer can be mounted to the side of the canoe.

    Of course, with the cost of this new technology, you might be better off buying yourself a fishing boat and keeping the canoe for floating down rivers. Here it is: Humminbird 360.
    And wherever the river goes, every living creature that swarms will live, and there will be very many fish. Ezekiel 47:9

  3. #3
    Join Date
    Oct 2003
    Location
    Damascus,Maryland USA
    Posts
    314

    Default

    Hi Dave,
    We have not tried the attachment method you speak of, however we do have 2 different types of portable transducer holders that attach to our canoe (and also on rental row boats) by means of a C clamp. They are aluminum and adjustable to depth. Worked well for us and our portable Humminbird. I cannot remember the brand name but I think they may still be available thru Bass Pro and also Cabela's catalogs. Hope this helps.
    Gerri

  4. #4
    Join Date
    Jul 2005
    Location
    Draffenville, KY, USA
    Posts
    406

    Default

    I have used a "fish finder" in both a fiberglass canoe and a roto-mold poly kayak. I silicone a plastic cup with the bottom cut out to a flat section of the floor, put the transducer and enough water to cover in it. It works fine. My sonar is an older Bottom Line model with a very narrow beamwidth which is good as a depth finder, but not much else. I have a newer Helix 5 DI GPS on my aluminum boat, but the transducer is mounted on the transom.
    Clint
    in far west Kentucky

  5. #5
    Join Date
    Dec 2002
    Location
    Des Moines, IA
    Posts
    1,499

    Default

    Quote Originally Posted by Bluegill Budd View Post
    I have used a "fish finder" in both a fiberglass canoe and a roto-mold poly kayak. I silicone a plastic cup with the bottom cut out to a flat section of the floor, put the transducer and enough water to cover in it. It works fine. My sonar is an older Bottom Line model with a very narrow beamwidth which is good as a depth finder, but not much else. I have a newer Helix 5 DI GPS on my aluminum boat, but the transducer is mounted on the transom.
    Clint

    I like idea of using silicone as opposed to using Weldwood that Joe Hyde used. I would think it would be a lot easier to remove from fiberglass it it became necessary. Never thought about using a plastic cup. Probably could also use a piece of pvc pipe also.

    Dave
    " If a man is truly blessed, he returns home from fishing to the best catch of his life." Christopher Armour

  6. #6
    Join Date
    Jul 2005
    Location
    Draffenville, KY, USA
    Posts
    406

    Default

    I have considered mounting my new sonar on my portable battery box. The transponder for it is much longer unit and I would have to find a plastic box to fit. And you are correct, when I sold the kayak I just peeled the silastic off.
    Clint
    in far west Kentucky

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts